20ml PE Eye Cream Tube with Massage Applicator

20mL PE Eye Cream Tube with Massage Applicator

Combine a squeezable PE tube with a shaped applicator for an eye cream pack designed around direct application. The red reference format pairs a slim body, screw cap and exposed massage head when opened. Start your Boyu Packaging project with the 20 mL reference size, then approve the complete tube, applicator and closure against your formula and filling process. MOQ: 10,000 pieces.

Технические характеристики

A Compact Pack Built Around the Applicator

The tube lets the user dispense product by squeezing the body and spread it with the shaped contact surface. The amount dispensed depends on formula viscosity, the outlet and squeeze pressure; this is not a metered-dose system. Approve the flow rate and how easily the formula spreads before finalizing the applicator.

The reference head has a reflective appearance, but a photograph does not establish its alloy, coating or construction. Request the exact contact material and finish. A metal and a ceramic option should be assessed separately for formula compatibility, surface integrity and resistance to handling damage. Avoid claims about improved absorption, depuffing or therapeutic effects based on the packaging alone.

Capacity, Dimensions and Filling Fit

Use 20 mL as the starting capacity for this design. The source also lists 30 and 50 mL selectable options and mentions 100 mL in a broader attribute field; those entries do not establish that every size uses the same 16 mm body or applicator assembly. Request a size-specific drawing and sample before specifying another capacity.

For a cream sold by weight, confirm the target net mass using the actual formula density and allow space for filling and tail sealing. Agree body length, shoulder geometry, usable print area, cap dimensions and sealed-tail allowance with the filling partner. The source shipping-package dimensions are not tube measurements.

PE Body and Formula Compatibility

For material selection, compare plastic and aluminum cosmetic tubes. PE provides a flexible body that can be squeezed during use. Squeeze feel, recovery and barrier behavior depend on the resin blend, wall construction and dimensions. Confirm whether a single-layer or multilayer body is proposed rather than assuming an oxygen barrier from the product name.

Test the complete filled assembly with your intended eye cream or serum. Review odor transfer, color change, weight loss, swelling, stress cracking, leakage and contact-surface changes under agreed storage conditions. Evaluate dispensing at the relevant temperatures and after repeated opening. Compatibility and shelf-life conclusions require evidence from the final formula and packaging combination.

Logo, Color and Decoration

Сравнивайте screen printing, hot stamping and labels when selecting decoration. Prepare vector artwork, print positions, color references and the required finish. Discuss screen printing for text and logos, offset printing for suitable multicolor artwork, labels or hot stamping for selected details. Approve each process on the proposed tube surface; do not assume a flat artwork proof predicts appearance on a narrow curved body.

Check small text, registration, cap-to-body color consistency and decoration durability after squeezing and handling. Keep artwork clear of the sealing and coding areas. A new head profile or body shape may require tooling; agree development samples, tooling ownership, charges and timing in writing.

Proposed Sampling, Production and QC Plan

Specification approval: agree the capacity, drawing, PE construction, contact material, outlet, cap thread and supply condition. Retain an approved sample as the appearance and assembly reference.

Filled-pack trial: check filling access, formula flow, head attachment, cap fit and tail-seal settings. Agree the tests and acceptance criteria before approving decorated production samples.

Production inspection: propose checks for dimensions, appearance, artwork, applicator retention, cap operation and sealing performance at an agreed sampling level. Establish which checks occur at the packaging supplier and which belong to the filler. This is a proposed project plan; the actual process and controls require Boyu confirmation.

Tail leakage, shoulder leakage and closure leakage have different causes. Review our guide to дефектам сварного шва косметических туб when agreeing validation and troubleshooting responsibilities.

Packing, Quotation and Order Planning

The minimum order quantity is 10,000 pieces. For a useful quote, provide the capacity, quantity and color split, formula type, applicator preference, artwork, filling method, delivery destination and requested date. Ask the quote to separate tube, cap, applicator, decoration, tooling, samples and any retail packing.

Confirm whether tubes ship open-tailed or sealed, whether caps are fitted, and how contact surfaces are protected. Agree inner protection, carton quantity, carton dimensions and gross weight before booking freight. Production timing depends on component availability, sample approval, decoration, tooling and order quantity; obtain the project schedule in writing.

For an after-sales review, retain batch codes, carton labels, photographs and representative affected units. Document the formula, filling and sealing settings where relevant so the parties can distinguish a component issue from an assembly or filling issue. Agree claim timing and remedies in the purchase terms.

Часто задаваемые вопросы

Is the applicator metal or ceramic?

The source describes metal and ceramic options. Confirm the exact material and surface treatment of your selected version using a component specification and approved sample. The reflective reference photo alone cannot identify the material.

Can I order a different capacity?

Discuss 30 or 50 mL options with Boyu and request a separate drawing. A larger capacity can change tube length, diameter, artwork and filling requirements. Do not assume the 20 mL assembly scales without changes.

Is the package airless or leakproof?

No validated airless system or universal leakproof performance is established by the reference listing. Agree leakage, closure and dispensing tests for the complete filled pack.

Каков MOQ?

The MOQ is 10,000 pieces. Include the capacity and color split in your inquiry so the configuration can be quoted accurately.

Can this tube be used for a sample range?

The format may suit a smaller retail presentation, but validate your intended fill and user experience. For format selection, compare tubes and mini jars for cream samples.

Request eye cream tube samples and a quotation with your formula, applicator, decoration and quantity requirements.