100mL Flat PET Fine Mist Spray Bottle with 18mm Neck Reference

Specify the Spray and Neck Finish Together

Start with the intended application distance, coverage, dose and feel on skin. Ask for a fine mist pump sample and test it with the actual formula. Measure the priming strokes, average output per full stroke, variation across consecutive strokes and spray pattern at a fixed distance. Check for drips at the nozzle and verify that the actuator returns fully between strokes.

The reference identifies an 18 mm neck. Request the exact thread drawing, sealing land dimensions, collar and gasket specifications before selecting a pump. Confirm fit, installation torque where applicable, cap retention and actuator clearance. Read the plastic bottle neck finish guide.

Технические характеристики

Choose the Pack Around the Formula

Facial and body mists

For water-based mists, check the spread and wetness at the intended use distance. Validate formulas containing solubilizers, oils, suspended solids or film-forming ingredients for uneven spray, blockage or residue after storage. Check the spray again after the filled sample has been left unused.

Fragrance and solvent-containing formulas

Provide the actual formula and its intended storage conditions so the PET grade and pump materials can be evaluated together. Request the material list for wetted parts, including dip tube, gasket, valve and any exposed metal. Agree a filled-pack test for odor and color change, mass loss, softening, stress cracking, leakage and spray performance. Assess materially different fragrance or solvent blends separately. Compare PET and PETG bottle materials when reviewing resin options.

100 mL Fill, Flat Profile and Line Fit

Specify the commercial net fill, brimful capacity and working headspace separately. Include pump displacement when reviewing fill height. Request overall height with cap, panel width, depth, shoulder radius, base geometry and unit weight. The supplier’s package dimensions and gross weight describe the listing’s shipping unit. Confirm component dimensions and weight on the production drawing.

Test the bottle in the filler, capper, labeler and cartoning equipment. Check how the narrow side and broad front face orient on the conveyor, whether the bottle rocks under capping load and whether the front panel remains flat after filling and storage. Confirm dip-tube cut length and inlet clearance at the base. Review residual liquid when the user holds the bottle at typical angles near the end of the fill.

Color, Logo and Decoration Approval

The gallery shows clear and tinted appearances paired with pink, green, yellow and purple sprayer components. Confirm which colors belong to the bottle, pump and cap, and approve physical samples for the chosen combination. Evaluate color and transparency with the real formula inside, since the fill can change the apparent shade.

Discuss screen printing, labels, hot stamping or other finishes on the exact PET surface. Check logo contrast, text legibility, alignment between panels and adhesive edge lift near radiused corners. Use the bottle drawing to define the print area and artwork clearances. Test decorated samples for scuffing, handling and product contact. Compare screen printing, hot stamping and labels.

For a different footprint, shoulder or neck, request a tooling review. Separate mold cost, ownership and trial timing from the bottle, pump and decoration prices. Approve the production-tool sample before locking artwork or retail inserts.

Предлагаемый план утверждения образцов и контроля качества

1. Approve the empty assembly

Check material, dimensions, volume, flatness, base stability, closure fit and cap clearance. Agree tolerances for color, transparency, scratches, black specks, sink marks and panel distortion. Retain an approved reference sample and drawing revision.

2. Trial filling, assembly and use

Run representative samples on the filling line and confirm net fill, closure installation and sprayer orientation. Compare spray performance and leakage before and after storage in the orientations expected in distribution. Define pass criteria for dose, priming, residual liquid and cap retention. If broad panels deform, compare fill conditions, pressure balance and wall distribution. See the plastic bottle paneling guide.

3. Approve decoration, cartons and release checks

Inspect printed samples and test the packing arrangement for abrasion, compression and pressure on the actuator. Agree inspection sampling, defect classes, lot identifiers and release records. Confirm Boyu’s production and inspection sequence for the selected build before ordering.

Export Packing and Order Planning

Confirm whether the bottle, sprayer and cap ship assembled or separately. Request units per carton, carton dimensions, gross weight and pallet configuration if applicable. Review how dividers or sleeves protect the clear faces and prevent neck loading. Compare freight using the actual export packing data for each configuration.

The MOQ is 10,000 pieces. For a comparable quote, provide the quantity and color split, target fill, formula category, spray dose and pattern, artwork, packing requirements and destination. Ask for separate costs for bottles, pumps, caps, decoration, samples, tooling and freight terms. Confirm timing after drawing approval, color and decoration trials, component availability, inspection and packing.

For repeat orders, keep the component codes, drawing revisions and approved finish samples. If a batch shows leaks, poor spray or distortion, retain affected units, carton labels, filling and capping settings and photographs. Agree the reporting window and remedy process in the purchase terms.

Часто задаваемые вопросы закупщиков

Will any 18 mm sprayer fit?

Match the complete finish and closure drawing, then test gasket compression, cap clearance and leakage. The nominal diameter is one part of the fit specification.

Is 300 mL available for this shape?

The reference selector shows 100 mL. The description also mentions a 300 mL cylindrical lotion bottle. Request a separate drawing and sample for any other size or dispenser configuration.

Can I use it for alcohol-based perfume?

Approve the PET grade, sprayer and seal against the actual fragrance concentration and storage conditions. Validate the filled pack for appearance, mass loss, leakage and dispensing before commercial release.

Send your formula category, fill target and spray requirements for a project-specific sample and quotation. Связаться с Boyu Packaging.