20 mL Metallic Red Eye Cream Tube with Vibrating Massage Head

Metallic Red Squeeze Tube with a Vibrating Massage Head

Boyu Packaging pairs a 20 mL squeeze tube with a rounded electric massage head and screw cap for eye cream and compatible skincare formulas. The metallic-red body and silver-tone head create a coordinated retail presentation. Explore the Boyu Packaging eye cream tube range.

Specifications

Approve Dispensing and Massage Operation

Check output and application with a filled sample

Use the production formula to measure squeeze force, dose repeatability and product residue at the outlet. Trial the assembly at the intended use temperatures and near the end of the fill. Check whether fluid formulas drip and whether dense creams require more pressure than users can comfortably apply. Approve the outlet, tip profile and finish together.

Check activation, stopping and packed-unit protection

Confirm how the head starts and stops, whether the cap contacts the control and how the user distinguishes operating states. Agree on a repeat-cycle test and inspect vibration consistency, unusual noise and loose parts after storage and representative handling. Confirm power source, battery inclusion and operating instructions before approving the retail pack.

Confirm the Tube Construction and Formula-Contact Materials

Request a component specification for the tube layers, nozzle, tip, seals and housing. Use filled samples to assess finish wear, swelling, odor transfer, leakage and changes in dispensing over your stability program. Agree on how the user cleans the tip, then verify the assembly with that cleaning method.

Set the Working Fill, Dimensions and Artwork

Use formula density and net weight to estimate the volume needed. Check working fill with the head fitted and allow a clean tail-seal zone. Approve the assembled drawing before designing fixtures or cartons. Provide vector artwork and a color standard. Review logo contrast on the metallic-red surface and keep the control, thread and batch-code area clear. Approve print adhesion and scuff resistance on the finished unit.

Filling Trial and Pre-Shipment Inspection

Confirm whether the head and cap are supplied assembled and whether the tail is open for filling. Share the filling machine, target weight, formula temperature and sealing method. In the pilot, check fill repeatability, seal width and strength, outlet leakage and batch-code readability. Keep a signed assembled sample and define defect limits for head fit, cap engagement, vibration, scuffs and print alignment.

Test the assembled pack in its intended carton. Inspect for accidental activation, loose caps and abrasion after handling. Ask your freight partner to confirm the documentation for the selected power configuration and shipping route. Agree on carton counts, dimensions, weight and retained batch samples before dispatch.

Request Samples and an OEM Quote

Send your target fill, formula type and viscosity, head requirements, artwork, order quantity and destination. Request an operating sample, signed drawing, component specification and itemized pricing for packaging, decoration and tooling if needed. Confirm production timing after sample approval. Request a Boyu Packaging quotation.

Frequently Asked Questions

Does a 20 mL tube hold 20 g of eye cream?

Calculate the required volume from the actual formula density and confirm the usable fill and tail-seal allowance in a trial.

Is the battery supplied with the applicator?

Confirm the power source and the contents of the packed unit in the quotation.

What is the minimum order?

The MOQ is 10,000 pieces. Include the quantity split by artwork and configuration in your RFQ.