Oval Dual-Chamber Airless Bottles with Two Actuators
Boyu Packaging’s oval two-actuator airless bottle pairs two skincare formulas in one package. Choose 15 mL × 2 or 30 mL × 2 for paired serums, lotions or pumpable creams. The clear outer body shows the two reservoir positions, while a removable overcap covers both actuators. Compare the airless bottle range for a coordinated line. Made in Zhejiang, China. MOQ 10,000 pieces.

Specifications
| Brand | Boyu Packaging |
|---|---|
| Place of origin | Zhejiang, China |
| Nominal capacity | 15 mL × 2 (30 mL total) or 30 mL × 2 (60 mL total). Approve actual working fill and headspace for each chamber. |
| Package format | Oval dual-chamber airless bottle with a clear outer body, two side-by-side reservoirs, two press actuators and a removable overcap. |
| Materials | SAN and PP construction. Approve the grade and material assigned to each part, including the reservoirs, dispensing pathways, seals and cap. |
| Pump configuration | Two actuators. Approve outlet routing, independent operation, dose per stroke and allowable variation for each side. |
| Customization | Screen printing and gold hot stamping. Approve component colors, trim, printable area and decoration adhesion on the signed sample. |
| Dimensions and packing | Request capacity-specific drawings, empty assembly weight, component packout and carton data. |
| MOQ | 10,000 pieces. Confirm allocation by size, finish and artwork. |
Design the Two-Formula Dispensing Sequence
Choose capacity and assign each formula
Select the smaller format for a shorter regimen and the larger format for a longer regimen. Supply Formula A and Formula B, their densities and viscosity ranges at the intended temperatures. Specify fill and headspace in each chamber and map each formula to the corresponding actuator. Use the front artwork and consumer instructions to identify the correct order of use.
Set independent dose targets
Agree on priming limits and dose tolerances for each side. Measure doses after priming and at the middle and end of use, then repeat after a defined idle period. If the regimen calls for a specific ratio, state it by mass or volume and approve how many presses of each actuator deliver it. Log residual product for each chamber using the airless pump evacuation measurement guide.
Dual-Actuator Bottle and Component Views
Review the side-by-side reservoirs, pump faces and protective overcap. Confirm the selected trim and assembly on a fit sample.




Factory Production and Customization Workflow
1. Approve the drawing, parts list and artwork
Freeze dimensions, reservoir assignment, pump interface, overcap fit and the material for each part on the purchase specification. Agree on color and trim references for the oval shell, band and actuators. Submit vector artwork, A/B identifiers and decoration placement. Confirm any tooling or fixture changes, ownership and review costs before project release.
2. Review molded components and decoration samples
Confirm the production route and inspect first-off sample parts for oval profile, fit, clarity, gate appearance and assembly marks. Approve a decorated unit for print registration, contrast over the clear body and foil coverage on the curved surface. Test adhesion and resistance to handling and formula exposure. Retain a signed sample and the approved artwork revision for bulk inspection.
3. Run a filled pilot before bulk release
Trial both fills and pump installations on the intended line. Verify orientation, fill height, seating depth and fill sequence, and define a control to prevent swapping the left and right reservoirs. Check overcap clearance and assembly repeatability. Approve the packaged pilot and inspection plan before the bulk run.

Quality Control and Acceptance
Inspect each dispensing path separately
Press each actuator on its own and check for unintended output from the other outlet, leakage around the head and leakage into the shell. Agree on a method for detecting carryover between outlets or pathways using clearly distinguishable samples or an approved tracer. Specify sample counts, conditioning, acceptable priming, dose variance and allowable residue for each side.
Check finish, protection and traceability
Inspect for scratches on the clear shell, trim inconsistencies, actuator drag, overcap looseness and artwork misalignment. Repeat pump and leak checks after the agreed storage and transport tests. Approve defect definitions and the lot sampling plan in writing. Check units per carton, case labels and lot IDs before shipment, and retain inspection records and samples for receiving claims.
Lead Time, Packing and International Shipping
Separate factory lead time from transit
Request dated milestones for fit samples, decorated samples, filled pilot approval, material release, molding, decoration, assembly, inspection and carrier handover. Confirm the event that starts bulk production and allow additional time for custom tooling or formula-test revisions. Request separate dispatch and arrival estimates for the selected route, and confirm approval cutoffs in writing.
Confirm carton protection and freight basis
Agree whether reservoirs, pump heads and overcaps ship assembled or in separate trays. Specify sleeves or partitions to protect clear surfaces and prevent cap compression or accidental actuation. Request pieces per carton, dimensions, net and gross weights, total volume and pallet layout. Compare sample courier and bulk air or ocean freight using the agreed named delivery point. Confirm invoice and packing-list requirements with your import team before dispatch.
To request a wholesale quote, send quantities by size, both production formulas, target dose per side, finish and foil references, artwork, inspection requirements, destination and desired arrival date. Request separate charges for samples, tooling, decoration, inspection and freight where applicable.
Buyer FAQ
What are the actual fill sizes?
The nominal options are 15 mL per side and 30 mL per side. Approve the working fill and headspace on the drawing and a filled pilot.
Can each formula be pumped separately?
The bottle has two actuators. Confirm which outlet each one operates and validate independent output and isolation on the sample.
Does equal capacity mean equal dosing?
Specify output per press for each formula. Test actual dose and variability throughout the use cycle.
Can the two chambers carry formulas with different viscosities?
Submit both formulas and test priming, output, pump return and residual product under the intended use conditions.
Which parts are SAN and which are PP?
Approve the component material list, including the outer body, reservoirs, flow-path parts, seals and overcap.
Can I have different colors for the two actuator sides?
Submit separate shade references and confirm component availability, decoration feasibility and the quantity allocation on the quote.
Can I combine capacities at the MOQ?
The MOQ is 10,000 pieces. Confirm the accepted split across size, trim and artwork before placing the order.
What samples can I approve?
Request a fit sample, a decorated sample and a filled pilot plan. Confirm fees, timing and which components will match bulk.
Can reservoirs be replaced or refilled?
Request the approved service procedure if required. Validate access, reseating, seal retention and pump operation on the exact assembly.
How are shipping damage and functional defects handled?
Agree on receiving and claims terms before ordering. Keep carton labels, batch IDs, affected quantities, photos and test samples for review.