Black Matte Plastic Empty Facial Cleanser Squeeze Lotion Tube 200ml

Black Matte 200ml HDPE Facial Cleanser Squeeze Tube with Screw Cap

Boyu Packaging model BY-309 is a 200ml black matte cosmetic squeeze tube developed for facial cleanser, body lotion, hand cream and other compatible skincare or personal-care formulas. The simple round tube, soft squeezable body and secure screw cap make it practical for daily use, while the matte black finish gives the package a clean, professional appearance. Colors, logo artwork and surface decoration can be customized for private-label and OEM projects.

Buyers can also view Boyu Packaging’s custom cream tube range, compare the related 50g–200g facial cleanser squeeze tubes, learn more about Boyu Packaging, or request a quotation.

Core Product Specifications

• Large 200ml format: suitable for daily-use facial cleanser, body care and professional skincare products.
• Controlled dispensing: the soft tube allows the user to squeeze out the required amount without exposing the remaining formula to repeated finger contact.
• Matte black appearance: creates a modern, unisex and professional look for men’s grooming, salon, spa and premium skincare lines.
• Screw-cap closure: simple to operate, easy to reclose and suitable for retail and travel when the cap and tube neck are correctly matched.
• Lightweight packaging: lower breakage risk and lower transport weight than glass packaging of a similar capacity.
• Wide decoration choice: supports simple one-color branding as well as metallic or multi-process decoration after artwork review.

Is 200ml Suitable for Eye Cream?

The original marketplace category may describe the cosmetic type as “eye cream,” but 200ml is not a typical retail eye-cream capacity. Eye products are usually packed in much smaller formats because they are applied in limited quantities. This 200ml tube is more realistically positioned for facial cleanser, face wash, body lotion, hand cream, cleansing cream, hair treatment or another high-consumption personal-care product.

If a buyer needs an eye-cream package, Boyu Packaging can review smaller tube sizes, narrow nozzles or applicator closures separately. The correct package should be selected according to the formula, dosage, filling process and intended consumer use rather than relying only on a marketplace category label.

HDPE and Other Common Cosmetic Tube Materials

HDPE belongs to the polyethylene family and offers good toughness and chemical resistance. In cosmetic tube production, however, “HDPE tube” can refer to a PE-based structure rather than a rigid HDPE bottle. The final resin combination, number of layers and barrier performance should therefore be confirmed in the technical specification.

Material selection should be based on formula compatibility, barrier requirements, decoration, target price and local regulatory requirements. A tube that works well for a water-based cleanser may not automatically be suitable for a formula containing high levels of essential oils, alcohol, solvents or active ingredients.

Capacity, Size, Weight and Wall Structure

The nominal capacity is 200ml. The correct filling volume may be lower than the maximum internal volume because the filler needs suitable headspace and enough room for heat sealing. The final fill level should be tested on the buyer’s filling line.

The listed 19 × 8 × 8cm package size and 0.03kg gross weight come from a single-item marketplace field. They should not be used directly to calculate unit dimensions, container loading or ocean freight. Before ordering, the buyer should request the confirmed tube diameter, total length, cap dimensions, orifice size, empty unit weight, wall structure, packing quantity, carton dimensions, gross weight and total CBM.

Tube height, diameter and wall thickness are not presented as fixed values here because they must correspond to the actual approved BY-309 sample or drawing. Changing the cap, tube length, wall structure or decoration can affect the final dimensions and weight.

Black Matte Finish, Color and Logo Customization

Black matte packaging is commonly selected for men’s skincare, professional salon lines, charcoal cleansers, spa products and minimalist beauty brands. The low-gloss surface reduces reflections and gives the pack a more understated look than a glossy tube.

Customization options include:

• Black, white or custom tube color based on a Pantone reference or approved sample
• Matte or glossy surface appearance
• Matching or contrasting screw-cap color
• Offset printing for multi-color artwork
• Silk screen printing for strong spot colors
• Gold or silver hot stamping for metallic accents
• UV printing or other decoration after technical review

For the best result, buyers should provide editable AI, PDF or EPS artwork. Fine text, full-coverage black printing and metallic details should be checked on a physical sample because the tube curve, matte surface and heat-sealed area can affect the final appearance.

Screw Cap, Sealing and User Convenience

The screw cap is a straightforward closure for a 200ml squeeze tube. It can be opened, closed and cleaned easily, and it avoids the more complex hinge structure of a flip-top cap. The cap material, thread, liner or sealing surface, orifice diameter and torque must match the tube neck.

Leakage prevention is a complete packaging-system issue. It depends on:

• Correct tube-head and cap-thread dimensions
• Stable cap sealing surface and closing torque
• Suitable tail-sealing temperature, pressure and time
• Correct headspace and filling temperature
• Compatibility between the formula and tube layers
• Transport position, carton protection and temperature changes

For this reason, no cosmetic tube should be described as universally leak-proof before testing with the final formula. Boyu recommends filling samples with the actual product and performing storage, inversion, squeezing and transport-related tests before mass production.

Recommended Products and Market Applications

The BY-309 tube is intended for cosmetic brands, contract manufacturers, private-label companies, importers, distributors, salons, spas and personal-care manufacturers. Its 200ml capacity is suitable for:

• Facial cleanser and foaming face wash
• Cleansing cream and clay cleanser
• Body lotion and body cream
• Hand cream in family or professional sizes
• Hair mask and compatible treatment cream
• Massage cream and salon-use products
• Other compatible gels, lotions and cream formulas

Very thin liquids may dispense too quickly from a large tube opening, while very thick formulas may require a larger orifice and different wall flexibility. The formula viscosity and target dose should be shared before the cap and opening are finalized.

Production Process

A typical custom cosmetic tube project follows these production stages:

1. Requirement confirmation: capacity, formula, tube material, diameter, cap, color, decoration, quantity and delivery terms are reviewed.
2. Technical confirmation: Boyu confirms whether an existing tube and cap can be used or whether structural development is required.
3. Artwork and color approval: printing area, Pantone colors, matte finish and decoration details are checked.
4. Sample preparation: existing, color-matched or decorated samples are prepared according to the project stage.
5. Tube production: tube body material is extruded or laminated, cut to length and connected to the molded shoulder and neck.
6. Decoration: offset printing, silk screen printing, hot stamping or UV printing is applied as approved.
7. Cap assembly: the screw cap is matched and assembled to the tube.
8. Inspection and packing: appearance, printing, dimensions, cap fit and packing are checked before shipment.

Quality Control

Quality standards should be confirmed before mass production so the buyer and supplier evaluate the same requirements. Inspection points can include:

• Tube color, matte consistency and surface cleanliness
• Diameter, length, wall structure and unit weight
• Shoulder molding, neck dimensions and orifice condition
• Cap fit, thread engagement and opening/closing function
• Artwork position, color, sharpness and print adhesion
• Hot-stamping completeness and resistance to normal handling
• Tail-sealing suitability on filled or production samples
• Leakage and compatibility testing using the agreed method
• Quantity, inner packing, carton strength and shipping marks

For formula-related performance, responsibility is shared: the packaging supplier confirms the component system, while the brand or filler should validate the final filled pack under the intended storage, filling and distribution conditions.

Safety, Environmental Considerations and Reuse

Cosmetic-grade PE materials are widely used for skincare and personal-care packaging. Required material declarations, restricted-substance documents or market-specific test reports should be confirmed according to the destination country and the buyer’s compliance plan.

PE tubes may be recyclable where local collection and recycling systems accept the exact structure. A mono-material PE design is generally easier to position for recycling than an aluminum-plastic laminated tube, but decoration, caps, labels and local infrastructure also affect real-world recyclability. Environmental claims should therefore be supported by the final material specification and the rules of the target market.

Although a tube can sometimes be refilled, this package should not automatically be marketed as repeatedly reusable. Hygiene, cleaning, formula contamination, cap condition and tail-seal structure must be considered. For most cosmetic products, controlled single-product use is more practical.

MOQ, Price and Mold Requirements

The standard minimum order quantity is 10,000 pieces per design. Different colors, capacities, artwork versions or cap specifications may each require a separate MOQ unless otherwise confirmed in writing.

The final unit price depends on the tube diameter and length, resin and layer structure, unit weight, cap specification, tube color, number of printing colors, hot-stamping area, UV decoration, packing method, quantity and Incoterm. A reliable quotation therefore requires more than the product photo.

A new mold is normally unnecessary when the buyer selects the existing BY-309 tube body, neck and screw cap. A mold or tooling charge may apply if the project requires a new diameter, shoulder, neck finish, cap structure, applicator, embossed component or another structural change. Any mold fee and development time should be quoted after a drawing or clear design brief is reviewed.

OEM Order Process and Lead Time

1. Send the product brief, formula type, quantity and destination.
2. Confirm the existing structure or custom development route.
3. Receive the quotation and technical specification.
4. Review a sample and test it with the actual formula.
5. Approve the artwork, color and pre-production standard.
6. Arrange the deposit and confirm the production schedule.
7. Complete mass production, inspection and packing.
8. Pay the balance and arrange shipment under the agreed terms.

For an existing structure with standard customization, mass production is commonly estimated at approximately 30–45 days after the final sample and artwork are approved. The exact schedule depends on material availability, printing processes, order quantity and production capacity. New mold development, multiple decoration processes or repeated sampling will extend the timeline.

Shipping and First-Order Advice

Cosmetic tubes are lightweight but can occupy significant volume. Freight should be calculated from the confirmed export packing list rather than the single-item marketplace package field. Before booking transport, request:

• Quantity per carton
• Carton dimensions and gross weight
• Total cartons, volume and gross weight
• Loading method and surface-protection requirements
• EXW, FOB, CIF or other agreed Incoterm
• Required export and destination-market documents

For the first order, allow enough time for sample delivery, formula testing, artwork revision, production, inspection, export handling and international transit. Production time alone is not the total project lead time.

After-Sales Support

If a quality issue is found, keep the outer-carton label and affected samples. Send the purchase order number, batch information, affected quantity, clear photos and short videos. This allows Boyu Packaging to trace the lot, review the defect pattern and discuss replacement or another corrective solution according to the confirmed order terms.

Frequently Asked Questions

What is the MOQ for the BY-309 tube?

The standard MOQ is 10,000 pieces per design. Different colors or artwork versions should be listed separately for confirmation.

Is the tube exactly 200g or 200ml?

The nominal packaging capacity is described as 200ml. The actual filling weight in grams depends on the product density. A 200ml tube does not automatically hold exactly 200g of every formula.

Is the empty tube weight exactly 30g?

The 0.03kg figure is a marketplace single-package gross-weight reference. The confirmed empty unit weight must be measured from the selected production sample and should not be assumed from the listing field.

Can this tube be used for eye cream?

Technically it may hold a compatible cream, but 200ml is much larger than a normal eye-cream package. Smaller precision-dispensing tubes are usually more suitable for eye-care products.

Can Boyu print a custom logo?

Yes. Offset printing, silk screen printing, hot stamping and UV printing can be reviewed according to the artwork and tube surface.

Can the black matte color be changed?

Yes. Custom tube and cap colors are available, subject to color approval, material behavior and production MOQ.

Does this product require a new mold?

Not when the existing BY-309 structure is used. Structural changes to the neck, shoulder, cap, diameter or applicator may require new tooling.

How is leakage prevented?

The tube head, cap, thread, sealing surface, filling level and tail seal must work together. Testing with the buyer’s actual formula is recommended before mass production.

What information is needed for a quotation?

Please provide the required quantity, formula type, tube and cap color, artwork, printing method, destination and preferred Incoterm.

Request a Quotation

For a project-specific quotation, send Boyu Packaging the required quantity, formula type and viscosity, black matte or custom color, logo artwork, printing requirements, destination and target delivery date.

Contact Boyu Packaging for samples and quotation details.