1. Home
  2. /
  3. Products
  4. /
  5. Airless Pump Bottles​
  6. /
  7. Dual-Chamber Airless Pump Bottles...

Dual-Chamber Airless Pump Bottles 2x10mL and 2x15mL

Boyu Packaging dual-chamber airless bottles in 2 × 10 mL and 2 × 15 mL. Zhejiang, China. MOQ 10,000 pieces.

Features

Dual-Chamber Airless Pump Bottles

Boyu Packaging’s dual-chamber airless bottle holds two skincare formulas in one pack. Select 2 × 10 mL or 2 × 15 mL for paired serums, lotion systems or a two-step treatment. The amber and clear styles offer different ways to identify the two chambers. Compare other airless packaging formats when planning the range. Made in Zhejiang, China. MOQ 10,000 pieces.

Four clear and amber dual-chamber airless pump bottles in two heights

Specifications

Brand and origin Boyu Packaging · Zhejiang, China
Nominal capacity 2 × 10 mL (20 mL total) or 2 × 15 mL (30 mL total). Approve the working fill and headspace of each chamber.
Package format Plastic dual-chamber airless bottle with an amber or clear outer appearance and a press-pump assembly.
Component materials Approve the resin grades for the shell, reservoirs, pump flow paths and seals on the bill of materials.
Pump and output Confirm whether the chambers dispense independently or together. Approve outlet layout, dose for each chamber and ratio tolerance where both are dispensed together.
Decoration Screen printing. Approve color, artwork orientation, print area and adhesion on the finished assembly.
Dimensions and packing Confirm size-specific dimensional drawings, neck interfaces, empty weight, packout and carton data.
MOQ 10,000 pieces. Confirm the split by capacity, color and artwork.

Four clear and amber dual-chamber airless pump bottles on a white background

Specify the Two Formulas and Dispensing Mode

Set the fill and dose for each chamber

Identify Formula A and Formula B by name, fill volume or mass, density, viscosity range and test temperature. Supply production formula samples. Define the target dose for each chamber, whether the two dispense separately or in one action, and the acceptable delivery ratio if dispensed together. Equal chamber volumes can accommodate an equal nominal fill. Establish the actual dose ratio using the selected pump and both formulas.

Check priming, ratio drift and usable product

Record each chamber’s priming strokes and measure full-stroke output separately at the start, middle and end of use. Repeat after storage and at the cooler end of intended use. For a simultaneous system, agree on how to capture or measure each stream, compare the measured ratio with the target and check whether one chamber empties first. Measure residual product per chamber with a consistent procedure from the airless pump evacuation guide.

Product Views and Chamber Layout

Review the side-by-side reservoirs, pump-head configurations and amber and clear finishes before approving the ordered assembly.

Clear dual-chamber airless bottle with amber and white reservoirs beside flowers
Amber dual-chamber airless bottle with two color-coded actuator faces
Clear dual-chamber airless pump bottle with white and amber reservoirs

Factory Production and Customization Flow

1. Approve the drawings and build specification

Choose the capacity pair, reservoir orientation, dispensing mode, cap and finish. Approve component drawings, assigned side for each formula, wetted materials and filling interface. Where tooling changes are needed, agree on tool ownership, costs, trial rounds and approval milestones before release.

2. Review molded parts and decorated samples

Confirm the proposed production route and check first-off parts for dimensional fit, clarity, cosmetic defects and pump alignment. Submit physical color references and vector artwork. Approve how Formula A and Formula B are identified on the assembled package, including legibility over the amber shell and alignment with the outlets. Verify screen-print adhesion and rub resistance on the actual finish.

3. Run a filled pilot, then release bulk production

Establish the fill order, approved headspace, assembly sequence and orientation for each side. Confirm filling equipment clearance and how the line prevents chambers from being swapped. Use signed fit and decorated samples plus a filled pilot to approve dosing, seals, artwork and packout before the bulk run. Agree on whether reservoirs and pump assemblies ship mounted or separately.

Quality Control and Acceptance

Check formula isolation and pump function

Define a test for transfer between chambers and around the outlets. Use distinguishable formulas or an approved tracer method where appropriate. Cycle the pump and check for carryover, leakage and a change in output after storage. Agree on sample count, conditioning, orientations and acceptance limits. Confirm compatibility for each formula with its reservoir, seals and flow path, and inspect for swelling, stress marks, discoloration or altered dispensing.

Inspect the assembled lot and shipment

Agree on defect categories and a lot sampling plan. Check cleanliness, component fit, chamber alignment, priming, dose, closure retention and print registration against signed samples. Inspect export packing for pump protection, surface separation and correct counts. Retain lot codes, inspection records and samples so receiving defects can be traced to the affected shipment.

Lead Time, Export Packing and Quotation

Request dated milestones for drawings, fit samples, decorated samples, compatibility approval, molding, assembly, inspection and carrier handover. Confirm the event that starts the bulk window and allow additional time for tooling or a revised pump. Agree on cartons, dividers, units per carton, gross weight, shipment volume, named delivery term and a separate transit estimate.

To request a wholesale quote, send quantities by configuration, both formulas, the target output and delivery ratio, decoration files, acceptance tests, destination and arrival date. Request separate charges for samples, tooling, printing, inspection and freight where applicable.

Buyer FAQ

How much does each side hold?

Choose 10 mL per side or 15 mL per side. Approve working fill and headspace separately for each chamber.

Does the pump dispense both formulas at once?

Confirm the operating mode and outlet layout on an approved sample. Specify independent dosing or simultaneous delivery in the RFQ.

Can I order a 1:1 dispensing ratio?

Specify whether 1:1 means mass or volume. Validate the dose from each chamber with both formulas across the pack’s usable life.

Can I pair a thin serum with a thicker lotion?

Submit both formulas and their expected viscosity ranges. Approve priming, output consistency, restart and emptying for the exact combination.

How is formula separation checked?

Agree on a transfer and leak test at the reservoirs, seals and outlets. Inspect during repeated use and after agreed storage or transit conditioning.

What plastic is used?

Request the complete component material list, including each wetted part, and approve resin grades and formula compatibility on production-intent samples.

Can I customize color and artwork?

Approve physical shades and screen-print proofs. Set how each formula is identified and confirm the accepted split by finish and artwork.

What is the MOQ?

10,000 pieces. Confirm the permitted allocation across capacities, colors and decoration in writing.

Can I get samples before production?

Request fit samples, decorated samples and a filled pilot plan. Confirm fees, the sample schedule and which components will match the bulk run.

What affects production lead time?

Capacity mix, material availability, tooling, print approvals and pump qualification affect the schedule. Confirm production, inspection, dispatch and transit as separate milestones.

What should I do if units arrive damaged?

Record carton labels, lot numbers, quantities and photos. Retain representative samples and follow the agreed acceptance and claims terms.

Specifications

Brand and origin Boyu Packaging · Zhejiang, China
Nominal capacity 2 × 10 mL (20 mL total) or 2 × 15 mL (30 mL total). Approve the working fill and headspace of each chamber.
Package format Plastic dual-chamber airless bottle with an amber or clear outer appearance and a press-pump assembly.
Component materials Approve the resin grades for the shell, reservoirs, pump flow paths and seals on the bill of materials.
Pump and output Confirm whether the chambers dispense independently or together. Approve outlet layout, dose for each chamber and ratio tolerance where both are dispensed together.
Decoration Screen printing. Approve color, artwork orientation, print area and adhesion on the finished assembly.
Dimensions and packing Confirm size-specific dimensional drawings, neck interfaces, empty weight, packout and carton data.
MOQ 10,000 pieces. Confirm the split by capacity, color and artwork.

CONTACT US

Related products