Luxury 300ml and 500ml PET Shampoo Pump Bottles

Boyu Packaging’s luxury round PET pump bottles combine a clean cylindrical profile with practical one-hand dispensing. The 300ml size works well for standard retail haircare, while the 500ml bottle provides a larger format for family, salon and hotel use. Bottle color, pump color, metallic pump accents and logo decoration can be customized for shampoo, conditioner, body lotion, hand sanitizer and liquid soap brands.

The lightweight PET body offers a glossy, premium presentation without the transport weight and breakage risk of glass. The standard minimum order quantity is 10,000 pieces per customized item.

Core Specifications

Why Buyers Choose This Bottle

• Premium round design: a simple silhouette suits modern salon, skincare and personal-care branding.
• Two commercial sizes: 300ml for standard retail products and 500ml for higher-volume use.
• Lightweight PET: easier and safer to transport than glass.
• Custom pump appearance: colored or metallic decorative accents can elevate shelf presentation.
• Controlled dispensing: the pump supports clean, convenient one-hand use.
• Large decoration area: the smooth cylindrical body works well with direct printing and labels.

300ml or 500ml: Which Size Should You Choose?

Nominal capacity is not the same as overflow capacity. The filling factory should confirm the target fill volume, headspace and fill level before ordering.

PET Material: Benefits and Limitations

PET is a mainstream packaging material for shampoo and personal-care bottles because it offers clarity, rigidity, impact resistance and low transport weight. It can be produced in transparent, opaque or colored finishes and gives a cleaner, glossier appearance than many HDPE bottles.

Advantages of PET

• Lightweight and shatter-resistant compared with glass
• Good clarity and glossy shelf appearance
• Suitable for many water-based personal-care products
• Efficient for international shipping and e-commerce
• Recyclable where suitable PET collection systems are available

Limitations to Check

• Standard PET may deform during high-temperature filling.
• Compatibility must be tested for high alcohol, solvent-rich, oil-rich or aggressive formulas.
• Dark or heavily pigmented colors may reduce recycling value in some markets.
• The pump is normally made from several materials, so the full pack is not automatically mono-material.

PET, HDPE, PP or Glass?

Custom Bottle and Pump Colors

The PET bottle can be produced in white, black, transparent or a custom color. Pump colors and decorative edges can be coordinated with the brand direction. Gold or silver details create a classic luxury appearance, while blue or custom colors can differentiate a specific product line.

A physical color sample is recommended for approval. PET, PP pump components and metallic decoration reflect light differently, so the same color reference may not look identical on every material.

Logo and Decoration Options

Silk-Screen Printing

Best for clean logos, text and spot colors. Direct printing gives the bottle a label-free appearance. Each color and print position requires separate setup and may affect price.

UV Printing

Suitable for detailed, multi-color artwork when the design and bottle surface pass testing. Print adhesion and rub resistance should be approved on a physical sample.

Hot Stamping

Metallic foil can add a premium accent to a logo or product name. Fine lines, large foil areas and artwork close to the shoulder or base require technical review.

Send an editable AI or vector PDF with fonts outlined. The printing area and final artwork position should be confirmed on the bottle drawing or approved sample.

Pump Head, Sealing and Daily Use

The lotion pump supports smooth one-hand dispensing for shampoo, conditioner, body lotion and liquid soap. A screw-cap option may also be considered when it matches the selected bottle neck. The pump output, spring structure, dip tube and actuator must be chosen for the formula rather than appearance alone.

To reduce leakage risk, the complete bottle-and-pump system should include:

• Matching neck finish and pump thread
• Suitable gasket or internal sealing structure
• Controlled tightening torque on the filling line
• Correct dip-tube length and angle
• Reliable pump lock for storage and transport
• Formula compatibility and filled-product transport testing

High-viscosity conditioner may need a different pump engine from hand sanitizer or liquid soap. Please provide viscosity, filling temperature and required dose per press before pump selection.

Suitable Products and Use Scenarios

• Shampoo, conditioner and hair treatments
• Body lotion and hand lotion
• Body wash, shower gel and bath products
• Liquid hand soap and suitable hand sanitizer formulas
• Salon and spa product lines
• Hotel, resort and hospitality bathrooms
• Private-label and e-commerce personal care

This packaging is aimed at cosmetic brands, contract fillers, importers, distributors, salon suppliers, hotel suppliers and OEM personal-care manufacturers. Buyers can also compare Boyu Packaging’s shampoo bottle range, lotion bottles and plastic cosmetic bottles.

Production Process

1. Requirement review: capacity, formula, bottle color, pump, artwork and quantity are confirmed.
2. Material and color preparation: PET resin and approved masterbatch are prepared.
3. Bottle forming: preforms are produced and blow moulded into the selected round bottle.
4. Surface decoration: printing or hot stamping is completed according to the approved artwork.
5. Pump matching: pump fit, dip tube and operating performance are checked.
6. Inspection and packing: approved bottles and pumps are packed for shipment.

Quality Control

Mass production should follow an approved sample and written specification. Typical controls include:

• Appearance, color, clarity, contamination and surface defects
• Capacity, bottle weight and key dimensions
• Neck finish, thread condition and pump fit
• Wall distribution, standing stability and deformation
• Print position, color, adhesion and rub resistance
• Pump priming, output consistency, lock function and dip-tube fit
• Leak testing according to the agreed sample and method
• Carton quantity, protection and shipping marks

For the most reliable result, the buyer or filling partner should complete compatibility, stability and transport tests with the commercial formula. Water testing alone cannot prove compatibility with shampoo, conditioner or sanitizer.

Safety, Sustainability and Refillability

PET is widely used for cosmetic and personal-care packaging. Material declarations and required compliance documents can be discussed according to the selected resin and destination market. Buyers should state the intended countries of sale before ordering because regulations and documentation vary.

The bottle body can be recyclable where suitable collection systems exist. However, overall recyclability depends on bottle color, pump materials, metal springs, labels, inks and local infrastructure. The bottle may be refilled in a controlled refill program, but repeated reuse should only be claimed after validating cleaning, hygiene, pump durability and formula compatibility.

MOQ and Price Factors

The standard MOQ is 10,000 pieces per customized item. The 300ml and 500ml sizes are separate production items. Different bottle colors, pump colors or decoration designs may also require separate MOQ because they involve independent setup.

Unit price depends on:

• Capacity, bottle weight and PET specification
• Bottle and pump colors
• Pump construction, output and metallic decoration
• Number of print colors and decoration positions
• Order quantity, packing method and trade term
• Testing, documentation and destination requirements

For an accurate quotation, send the capacity, quantity, formula type, bottle and pump colors, artwork, destination country and preferred Incoterm.

OEM/ODM Process

1. Send your capacity, quantity, formula, color and artwork requirements.
2. Confirm the bottle model, pump system and decoration method.
3. Review the quotation and technical specification.
4. Receive existing samples or arrange customized samples.
5. Approve color, artwork, pump function and quality standard.
6. Mass production begins after order confirmation and agreed payment.
7. Inspection, packing and shipment are arranged.

Is a New Mold Required?

A new mold is normally not required when the buyer selects an existing 300ml or 500ml bottle and only changes color, pump appearance or logo. New tooling may be required for a proprietary bottle shape, shoulder, base, neck finish or custom pump component. Tooling cost, ownership, T1 samples and development time are quoted separately.

Production Time and Logistics

Customized production generally takes about 30–45 days after sample and artwork approval. Custom tooling, complex decoration, repeated color corrections and peak factory schedules may extend the timeline.

Samples can be shipped by express courier. Bulk goods may be delivered by sea, air, rail or domestic transport to the buyer’s nominated warehouse. Final pieces per carton, carton dimensions, gross weight and total volume are confirmed after the bottle-and-pump packing method is approved. Importers should confirm the Incoterm, destination port, carton marks and required shipping documents before production.

About Boyu Packaging

Hangzhou Boyu Packaging provides OEM and ODM packaging for haircare, skincare, personal care and fragrance brands. Services include package selection, mold development, decoration, sampling, component matching, quality control and export coordination. View the full luxury PET pump bottle series or explore more solutions on the Boyu Packaging homepage.

Frequently Asked Questions

Can I mix 300ml and 500ml within the 10,000-piece MOQ?

Normally, each capacity is a separate production item and requires its own MOQ. Share the exact quantity split for review before quoting.

Can the pump be gold, silver or another color?

Yes. Metallic decorative edges and custom colors can be evaluated. The final option depends on pump construction, process feasibility and MOQ.

Can I use a screw cap instead of a pump?

A compatible screw cap may be used if it matches the selected bottle neck finish. The neck and closure must be confirmed as a set.

Is the pump suitable for thick conditioner?

The formula viscosity must be tested with the selected pump. A thick conditioner may need a higher-output pump or a larger internal flow path.

Is this bottle suitable for hand sanitizer?

It may suit compatible gel or liquid sanitizer formulas, but alcohol content, viscosity and material compatibility must be tested before mass production.

Can PET bottles be hot filled?

Standard PET may deform at elevated temperatures. Provide the actual filling temperature so the structure can be evaluated and tested.

How do you reduce leakage?

Leak control includes matching the neck and pump thread, checking the sealing structure, controlling cap torque, cutting the dip tube correctly and testing the filled pack under expected shipping conditions.

Can you provide exact dimensions and bottle weight?

Yes. Exact height, diameter, neck finish and weight will be taken from the selected 300ml or 500ml drawing or approved sample.

What after-sales support is available?

Boyu Packaging supports production tracking, shipment coordination and quality follow-up. Any issue should be documented with photos, videos, carton labels, batch information and quantity so it can be reviewed efficiently.