Three Metal Ball Roll-On Massage Eye Cream Tube 10/15/20ml

10ml 15ml 20ml Three Metal Ball Roll-On Massage Eye Cream Tube

Boyu Packaging’s BY-YH006 is a compact PE eye cream tube fitted with a three-metal-ball roll-on massage applicator. Available in 10ml, 15ml and 20ml capacities, it combines controlled squeeze dispensing with a smooth rolling contact surface for eye cream, eye gel, cooling serum and other targeted skincare formulas. The tube color, logo, surface finish and selected component details can be customized for private-label and OEM projects.

Explore more custom eye cream tubes, compare Boyu’s cosmetic tube collection, learn about Boyu Packaging, or request a quotation and sample.

Product Specifications

Why Use a Three-Ball Massage Applicator?

The applicator uses three freely rotating metal balls to distribute a small amount of product while gliding across the skin. Compared with a standard nozzle, the larger contact area can provide a more even and sensory application. The metal surface also feels naturally cool at normal room temperature, which helps create a premium eye-care ritual without requiring an electrical component.

• Three-point contact: spreads product across a wider area than a single-ball applicator.
• Smooth roll-on action: supports gentle application without direct finger contact.
• Cooling sensation: the metal balls can provide a fresh feel during use.
• Controlled dispensing: users squeeze the tube and apply only the quantity required.
• Distinctive presentation: the functional head differentiates the product from an ordinary squeeze tube.
• Portable format: 10ml–20ml capacities suit retail, travel and skincare gift sets.

Claim guidance: the packaging creates a cooling massage experience, but it does not independently remove dark circles, wrinkles or puffiness. Finished-product claims must be supported by the cosmetic formula, suitable evidence and applicable regulations.

PE, PBL and ABL Material Comparison

BY-YH006 is specified with a PE body. If the formula contains light-sensitive or oxidation-sensitive ingredients, ask whether a compatible PBL or ABL body can be paired with the same three-ball applicator.

Capacity and Formula Compatibility

The 10ml size is suitable for concentrated eye treatments, samples and travel sets. The 15ml size is a common retail option, while 20ml provides a larger fill for extended-use products. Capacity alone does not determine the tube dimensions. Diameter and length must be confirmed on the technical drawing.

The formula must be fluid enough to reach the dispensing channels but viscous enough to remain controlled around the rolling balls. Very thick creams may dispense slowly, while thin serums may require additional flow control to prevent seepage.

Cap, Sealing and Convenience

The protective cap helps keep the applicator clean and reduces accidental contact during storage and transportation. Leakage resistance depends on the tube shoulder, dispensing channels, ball seats, internal seals, cap fit and tail seal working together.

Recommended checks before mass production:

• Confirm that all three balls rotate smoothly after repeated use.
• Check that the formula is distributed evenly.
• Perform upright, inverted and side-storage leakage tests.
• Verify that the cap does not press or damage the balls.
• Test the tail seal under squeezing and elevated temperatures.
• Check the metal balls for corrosion or discoloration.

Color, Logo and Decoration

The tube body can be produced in custom colors. Decoration options include offset printing for multi-color graphics, silk-screen printing for solid logo colors, hot stamping for metallic accents and labels for flexible artwork changes.

Provide vector artwork, Pantone references, print dimensions and finish requirements. A physical color sample should be approved whenever color consistency is important.

Manufacturing Process

1. Requirement confirmation: capacity, formula, color, artwork and filling method are reviewed.
2. Tube production: PE is extruded or the selected laminate is formed into the tube body.
3. Shoulder forming: the shoulder and dispensing structure are joined to the body.
4. Decoration: printing, hot stamping or labeling is applied.
5. Applicator assembly: the three-ball component and protective cap are fitted.
6. Inspection and packing: appearance, rolling function, fit and dimensions are checked.

For many filling operations, the tubes are supplied with the tail open. The contract filler fills the product from the open end and heat-seals the tail.

Quality Control and Leak Prevention

The main quality risks are inconsistent ball rotation, leakage around the applicator, weak shoulder bonding, poor tail sealing and damaged printing.

• Raw-material and component inspection
• Tube diameter, length, weight and capacity checks
• Shoulder bonding and tail-seal testing
• Three-ball rotation and dispensing inspection
• Leakage, drop and temperature-cycle tests
• Printing position, color and adhesion inspection
• Final carton and quantity verification

For a new formula, fill production-equivalent samples and retain them under the intended storage conditions. An empty sample cannot confirm formula compatibility or leakage resistance.

Safety, Sustainability and Reuse

PE is lightweight and recyclable where suitable collection systems exist. However, the complete package combines plastic components and metal rolling balls. Recyclability must therefore be assessed according to the final structure and local recycling facilities.

This packaging is generally designed for a single commercial fill. Consumer refilling is not recommended unless the final package has been specifically validated for reuse, because residue around the balls may be difficult to clean.

OEM/ODM Process

1. Send the desired capacity, quantity, formula, color, artwork and destination.
2. Select the tube structure, diameter, three-ball head and cap.
3. Receive the quotation for components, decoration, samples and packing.
4. Approve a working sample and complete compatibility testing.
5. Confirm the artwork, colors, technical drawing and quality standard.
6. Arrange mass production after the deposit and final approval.
7. Complete inspection, balance payment and shipment.

Existing tooling is normally the fastest and most economical option. A proprietary tube diameter, shoulder, cap or massage-head design may require new molds.

MOQ, Price and Lead Time

The standard MOQ is 10,000 pieces per design. Price depends on the capacity, tube structure, three-ball assembly, cap finish, printing, hot stamping, packing and order quantity.

Custom sampling may require approximately 7–25 days. Mass production normally takes around 30–45 days after sample approval and deposit. New tooling and special decoration can extend the schedule.

Shipping and Importer Checklist

• Request a technical drawing before designing cartons or filling-line tooling.
• Confirm whether the tubes and applicators are supplied assembled.
• Do not calculate freight from the marketplace single-package data.
• Request the quantity per carton, carton dimensions and gross weight.
• Test the formula for dispensing, rolling, corrosion and leakage.
• Confirm the filler’s tail-sealing equipment.
• Approve a physical golden sample and written inspection standard.

About Boyu Packaging

Hangzhou Boyu Packaging supplies cosmetic primary packaging for skincare brands, contract fillers, distributors and importers. Its range includes cosmetic tubes, plastic bottles, glass packaging, pumps, sprayers and other OEM/ODM components.

For BY-YH006 projects, Boyu Packaging can coordinate the tube body, three-ball applicator, cap, decoration, sample approval, quality requirements and export packing.

Frequently Asked Questions

What capacities are available?

The main capacities are 10ml, 15ml and 20ml. Final diameter and length must be confirmed for the selected tube structure.

Do the metal balls remove puffiness or dark circles?

They provide a cooling massage experience and help distribute the formula. Anti-puffiness and dark-circle claims must be supported by the tested performance of the finished cosmetic product.

Can the tube handle thick eye cream?

It depends on the formula viscosity, outlet structure and ball clearances. Production-equivalent samples should be filled and tested before approval.

Can the color and logo be customized?

Yes. Custom colors, offset printing, silk screen, hot stamping and labels can be evaluated.

How can leakage be reduced?

Use matched components, verify ball-seat tolerances, test the actual formula, control tail-sealing parameters and conduct inverted and temperature-cycle tests.

Is a new mold required?

Standard sizes can normally use existing tooling. A proprietary tube, shoulder, cap or massage-head design may require new molds.

What information is needed for a quotation?

Send the required capacity, quantity, formula viscosity, colors, logo artwork, printing method, filling method, destination and required delivery date.