8 and 16 fl oz Amber Glass Spray Bottles with Black Trigger Sprayers

Choose the Spray Pattern Before Approving the Bottle

Specify the intended surface, typical spray distance and target coverage. A wider pattern suits broad surface coverage, while a stream may suit directed application. The reference gallery shows different nozzle settings. Confirm the available positions, spray pattern and output with the actual trigger and formula. For a starting point, review the sprayer selection guide for chemical formulations.

For regular use, compare hand comfort, trigger reach and balance at the beginning and end of a fill. A larger bottle needs fewer refills in applications that allow refilling, but its filled weight can matter during repeated spraying. Ask for a filled sample of each size before deciding.

Technical Specifications

8 fl oz and 16 fl oz Size Planning

The source title uses 8 and 16 fl oz, while its size selector lists both 240/480 mL and 250/500 mL. Treat these as different nominal references until a drawing confirms the configuration. If your label needs a particular net quantity, provide that requirement separately from the bottle’s brimful capacity. Leave the headspace specified by your filler and allow for closure displacement.

A smaller format can suit frequent handheld use or a compact retail carton. The larger format can suit products that are used over a broader area or need more fill per pack. Compare filled weight, bottle diameter, overall height with the trigger installed, center of gravity and clearance in your carton. Request a separate drawing, pack sample and dip-tube cut length for each size.

Trigger, Neck Finish and Dip-Tube Fit

Match the closure to the glass finish

Request the glass neck drawing and the matching closure specification. Check thread profile, sealing surface, gasket design and the supplier’s capping instructions. Agree application and removal torque where relevant, then confirm closure fit on samples from production tooling. Use the bottle cap torque guide to frame that discussion.

Measure spray and residual liquid

Record priming strokes, spray output per full stroke and the pattern at a fixed distance. Check consistency over repeated strokes, after storage and near the end of the fill. Approve the dip-tube length and cut geometry with the actual bottle base. A tube cut too short leaves excess liquid, while a tube that bottoms out may restrict intake. Check the off position separately if the chosen sprayer has one.

Amber Glass and Formula Compatibility

Specify an amber color standard and confirm whether the color is integral to the glass or applied as a finish. If light exposure affects your formula, request transmission data for the selected bottle and validate the filled pack under intended storage conditions. Color appearance alone does not establish a protection level.

Assess the formula against the entire product path, including the dip tube, valve, seals and any exposed metal. Give the supplier the formula category, viscosity range, pH where relevant and representative samples. Review changes in appearance, smell, leakage, seal condition and spray behavior. Alcohol-rich, oil-rich or chemically aggressive formulas each require their own compatibility assessment. Confirm suitability before using the bottle for any specific formula.

Logo, Decoration and Retail Presentation

Discuss screen printing, labels, decals or other approved finishes for the exact amber glass surface. Use a drawing to mark artwork placement relative to the shoulder, heel and mold seam. Request a decorated sample to check contrast, registration and lot-to-lot appearance. Compare the options in our screen printing, hot stamping and label guide.

For wet-use or frequently handled products, agree rub, scuff and product-contact tests for the decoration. Check labels for edge lifting after exposure to the intended environment. Specify the final print area before ordering cartons or display inserts. A custom bottle shape may require tooling. Agree prototype stages, tooling ownership, trial charges and approval timing in the quotation.

Proposed Sampling and Acceptance Plan

1. Approve the empty components

Approve the drawing, glass color, size, weight tolerance, neck finish, trigger assembly and any decoration. Agree measurable limits for finish damage, chips, cracks, appearance defects and bottle stability. Retain signed samples for comparison with later lots.

2. Run a filled-pack trial

Confirm net fill and headspace, capping settings and trigger orientation on the intended line. Assess output, spray pattern, actuator recovery and leakage in the agreed orientations. Test temperature and storage conditions relevant to the actual formula and distribution route. Agree pass/fail criteria before production release.

3. Approve shipment packing and production checks

Trial the complete carton with the agreed separators or trays, including protection around the glass neck and trigger. Confirm whether sprayers ship installed or separately and how loose components stay clean. Agree inspection sampling, acceptance limits and release records with Boyu for the actual order. These steps form a proposed approval plan for the selected configuration.

Export Packing, Quote and Reorders

Compare partitioned export cartons and any pallet option using confirmed units per carton, outer dimensions, gross weight and pallet layout. Keep glass surfaces separated, check stacking strength and verify the trigger head has clearance. Use the packing data to compare freight and handling costs for both capacities.

MOQ is 10,000 pieces. Send the desired net fill, quantity split, formula type, trigger pattern and output target, artwork, packing requirements, destination and delivery target. Ask the quote to itemize glass, sprayers, decoration, retail packs, tooling, sample charges and freight terms. Schedule around drawing approval, component availability, decorated samples, production, inspection and packing.

For repeat supply, retain drawing revisions, component IDs, approved samples and lot records. In a damage or performance claim, keep affected bottles and triggers, carton labels, photographs and relevant fill or capping records. Agree the reporting window and remedy process in the purchase terms.

Buyer FAQs

Can I use the same trigger on both sizes?

Verify that both neck drawings match the selected trigger. Confirm dip-tube length separately and test priming and residual liquid on both assemblies.

How do I choose between mist and stream?

Define the application distance, target coverage and acceptable droplet behavior. Compare candidate heads with your actual formula and agree the approved setting and output.

What is the minimum order?

The MOQ is 10,000 pieces. Include the capacity, color and decoration split so the order can be quoted accurately.

Send your fill target and trigger requirements to start sample selection. Request a project quotation.