Custom Luxury PP Matte Pink Lotion Pump Bottle 30-120ml

30ml, 50ml, 100ml & 120ml Custom Matte Pink Airless Lotion Pump Bottle

Boyu Packaging model BY-L070 is a round airless pump bottle designed for lotion, serum, moisturizer and other compatible skincare formulas. The matte pink finish gives the pack a soft, premium appearance, while the airless dispensing system helps limit repeated air contact during use. Main capacities include 30ml, 50ml, 100ml and 120ml, with custom colors and silk screen logo printing available for OEM projects.

Browse Boyu Packaging’s airless pump bottle collection, compare other custom lotion bottles, or read the airless bottle supplier selection guide. Buyers with an active project can contact Boyu Packaging for samples and a quotation.

Core Product Specifications

Important data note: the marketplace fields “3 × 3 × 8cm” and “2.0kg” are not credible as universal dimensions and gross weight for one empty bottle across all capacities. They should not be used for freight or product drawings. Request the actual unit dimensions, empty weight, carton quantity, carton dimensions and gross weight for the selected size.

How the Airless System Works

An airless bottle does not work like a standard lotion bottle with a long dip tube. When the actuator is pressed, the pump removes a measured amount of product. The pressure difference allows a follower piston inside the bottle to rise, pushing the formula upward while reducing the empty headspace above it. Air enters below the piston through the bottom vent, not directly into the formula chamber.

This structure can provide cleaner dispensing and reduce repeated exposure to outside air. It does not make a formula permanently oxygen-free, sterile or automatically longer lasting. Formula stability and shelf life must still be established by the brand’s formulation and packaging tests.

The listed “screw cap” description should not be read as meaning that BY-L070 is an ordinary bottle with a simple removable cap. For this product, it more likely describes the threaded attachment between the airless pump collar and the bottle. The final pump, overcap, locking method and serviceability should be confirmed from the physical sample.

Capacity Guide

Nominal capacity is not the same as the maximum internal volume. The correct filling volume depends on pump priming space, piston position, formula density and the filling method. A 100ml bottle should not automatically be described as holding exactly 100g because milliliters measure volume and grams measure mass.

AS and PP Material Structure

The supplied attributes list an AS body and collar together with a PP base and PP material. These descriptions can be consistent in a multi-component airless bottle: AS may be used for the rigid outer shell or decorative collar, while PP can be used for the base, pump and formula-contact components. The precise component breakdown must be confirmed before an order.

The bottle’s safety and environmental profile depend on the complete component structure, colorants, decoration and intended formula. Do not assume that the outer AS shell is the formula-contact layer or that every part is made from one resin.

Product Features and Buyer Benefits

• Airless dispensing: limits repeated air entry into the product chamber during normal use.
• Controlled dose: a pump is easier to dose consistently than pouring from an open bottle.
• No long dip tube: the follower-piston system pushes the formula upward.
• Premium round appearance: the matte pink finish suits feminine, soft-luxury and modern skincare positioning.
• Multiple retail sizes: 30ml through 120ml support coordinated serum, moisturizer and lotion ranges.
• Custom branding: tube color, pump color and silk screen logo can be coordinated for private-label products.
• Reduced direct handling: consumers dispense the formula without placing fingers inside a jar.

An airless system is more complex and usually costs more than a conventional lotion bottle. It also requires correct priming, tight seals and formula matching. Very thick, highly aerated or particle-containing formulas may pump poorly unless a suitable pump engine and outlet are selected.

Suitable Products and Market Positioning

BY-L070 is intended for skincare brands, contract fillers, private-label manufacturers, cosmetic importers, packaging distributors, spas and professional beauty lines. Recommended contents include:

• Facial lotion and moisturizer
• Serum and essence
• Liquid foundation and primer
• Sunscreen lotion
• Anti-aging cream with pumpable viscosity
• Eye-care lotion in smaller capacities
• Body lotion in larger capacities

The original listing mentions “liquid perfume bottles,” but this lotion-pump airless format should not be presented as a standard perfume spray bottle. Alcohol-based fragrance normally requires a compatible fine-mist sprayer and verified material compatibility. If fragrance is the intended product, send the alcohol level and dispensing requirement for a separate evaluation.

Matte Pink Color and Logo Customization

The matte pink finish can support skincare, beauty, spa and gift-set positioning. Buyers may request clear, white, black or another custom color, subject to material behavior, color matching and MOQ. A Pantone reference is useful, but the final color should be approved on the actual AS and PP components because different plastics can show the same pigment differently.

Silk screen printing is suitable for simple spot-color logos and product names. Provide editable AI, EPS or vector PDF artwork. The supplier should confirm the printable area, registration tolerance, ink system and adhesion test before production. Fine text, wraparound graphics, metallic effects or multi-color registration may require a different decoration route and separate quotation.

For a coordinated package, approve the bottle color, pump color, overcap, logo position and surface gloss together. Digital renderings help with layout but do not replace a physical color and decoration sample.

How Leakage and Dispensing Problems Are Reduced

Airless-bottle performance depends on the complete system: actuator, pump chamber, valves, gasket, collar, inner chamber, follower piston and bottom vent. A good-looking shell cannot compensate for a poor seal or an incompatible formula.

• Confirm that the pump collar is assembled evenly and to the approved torque.
• Inspect sealing surfaces, gaskets and snap-fit or threaded connections.
• Check piston movement and bottom-vent function.
• Match pump output and outlet diameter to the formula viscosity.
• Control the filling process to reduce trapped air above or within the formula.
• Prime samples using full, slow strokes and record the number of strokes before first output.
• Run upright, inverted, temperature-cycle, drop and transport tests as appropriate.
• Evaluate dose consistency, product evacuation and residual product.

No pump package should be called universally leak-proof before filled-product testing. Leakage can result from loose assembly, damaged seals, incorrect filling, pressure changes or formula attack. Bottom leakage and no-output symptoms should be investigated separately because the causes may differ.

Production Process

1. Specification review: confirm capacity, component materials, pump output, formula, colors, artwork and quantity.
2. Component production: mold the AS outer body/collar and PP inner, base, pump or piston components according to the approved structure.
3. Color and surface preparation: produce the selected matte pink or custom-color components.
4. Decoration: apply silk screen printing or other approved logo treatment.
5. Pump and piston assembly: assemble the airless mechanism in a clean, controlled process.
6. Functional inspection: check pump action, component fit, seal integrity and appearance.
7. Packing: protect decorated surfaces and pack by the confirmed carton specification.

The actual molding and assembly locations should be confirmed for supplier-audit or origin-document purposes. Boyu Packaging coordinates the product specification, customization, quality requirements and export supply for the project.

Quality Control

Quality requirements should be agreed before mass production, with an approved sample and technical drawing serving as the reference. Inspection may include:

• Material and component identification
• Capacity, height, diameter, unit weight and critical fit dimensions
• Surface cleanliness, matte consistency, color difference and molding defects
• Logo position, ink coverage and print adhesion
• Pump assembly, actuator return and first-output performance
• Dose output and repeatability based on the agreed sampling plan
• Piston travel, product evacuation and residual volume
• Leakage, temperature and transport-related tests
• Carton quantity, protection and shipping marks

For meaningful pump and compatibility testing, use the buyer’s actual formula or a technically representative substitute. Water-only testing may not predict performance with viscous lotion, oils, alcohol or active ingredients.

Safety, Recycling and Reuse

AS and PP are commonly used in cosmetic packaging, but material names alone do not establish suitability for every formula or every destination market. Buyers should request the final component specification and applicable material declarations or test documents required by their compliance plan.

The bottle contains multiple components and may combine different plastics, springs, seals, ink and pigments. Actual recyclability depends on whether the package can be separated and whether local recycling systems accept the materials. Environmental claims should reflect the final construction rather than describing the whole package as automatically recyclable.

Some threaded airless packages can technically be opened, but ordinary refilling may introduce air, contamination or piston-position problems. BY-L070 should not be marketed as repeatedly reusable unless the selected structure has been designed and validated for refilling. A refill claim needs a defined cleaning and refill method.

MOQ, Samples, Price and Mold Requirements

The standard MOQ is 10,000 pieces per design. Different capacities, colors or artwork versions should be listed separately. Do not assume that 2,500 pieces in each of four capacities automatically satisfies one 10,000-piece MOQ.

Existing undecorated samples may be provided free when available; international courier charges are normally paid by the buyer. Custom-colored or printed samples may require sampling fees, printing setup charges and additional preparation time.

The unit price depends on capacity, AS/PP structure, pump specification and output, color, printing, order quantity, packing and Incoterm. A reliable quotation should state whether it includes the complete bottle, pump, overcap, decoration, individual protective packing and export charges.

A new mold is usually unnecessary when an existing BY-L070 capacity and standard component set are selected. A new bottle shape, capacity, shoulder, pump collar, actuator or embossed part may require tooling. Printing screens are setup items and should not be confused with structural mold costs.

OEM Process and Production Time

1. Send the required capacity, quantity, formula description, color, logo and destination.
2. Confirm the existing bottle structure, pump output and component materials.
3. Receive the quotation, sample plan and preliminary timeline.
4. Test the physical sample with the actual formula.
5. Approve the technical drawing, color standard and artwork proof.
6. Confirm the purchase order and deposit.
7. Complete mass production, decoration, assembly and inspection.
8. Confirm the packing list, balance payment and shipping arrangements.

For a standard existing structure, a typical customized mass-production period is approximately 30–45 days after final sample and artwork approval, subject to the confirmed purchase-order schedule. New molds, repeated color matching, complex decoration or peak production periods can extend the lead time.

Shipping Advice for First-Time Importers

Empty airless bottles are relatively light but occupy volume and contain assembled pumps that need protection. Freight should be calculated from the confirmed packing list, not the marketplace single-item data.

• Request quantity per carton, carton dimensions, net/gross weight and total CBM.
• Confirm whether pumps, bottles and overcaps are packed assembled or separately.
• Use partitions, trays, bags or other protection appropriate for matte and printed surfaces.
• Clarify EXW, FOB, CIF or other trade terms and which local destination charges are excluded.
• Allow time for sampling, testing, production, inspection, export handling and transit.
• Confirm customs descriptions and compliance documents for the destination market.

After-Sales Support

If a problem is found, retain affected bottles, formula samples and carton labels. Provide the purchase order, batch number, affected quantity, photos, videos, filling conditions and test records. For pump problems, record whether the actuator moves, whether the piston rises, how many priming strokes were used and whether the issue appears before or after transport. This information helps separate component, assembly, formula and filling-process causes.

Frequently Asked Questions

Is BY-L070 a true airless bottle?

It is described as an airless pump bottle. The final sample should confirm a follower piston, bottom vent and no conventional dip tube.

Is the entire bottle made from PP?

No. The supplied specification lists an AS body and collar with a PP base/material. Confirm which AS and PP components contact the formula in the final structure.

Can I use this bottle for perfume?

It is mainly a lotion and skincare airless pump bottle, not a standard fine-mist perfume bottle. Alcohol-based fragrance requires separate material and sprayer compatibility testing.

Are 30ml, 50ml, 100ml and 120ml the same diameter?

Not necessarily. Exact diameter, height and weight must be confirmed for each capacity from the corresponding drawing or sample.

Why is there no dip tube?

A true airless system uses a rising follower piston and pressure difference to move the formula toward the pump.

Can thick cream be filled?

Possibly, but viscosity, particles, pump output and outlet size must be tested. Very thick formulas may not dispense consistently.

What is the MOQ?

The standard MOQ is 10,000 pieces per design. Send the quantity for every capacity, color and artwork version.

Are samples free?

Available existing samples may be provided free, while international courier costs are paid by the buyer. Custom samples may be charged.

Does the 2.0kg figure mean one bottle weighs 2kg?

No. It is an unverified marketplace single-package field and should not be treated as the bottle’s empty unit weight.

What information is needed for a quotation?

Provide capacity, quantity per design, formula type and viscosity, required pump output, colors, logo artwork, packing request, destination and trade term.

Request a Quotation

Send Boyu Packaging your required capacity, quantity, formula, matte pink or custom color, logo artwork and delivery destination. We will confirm the available BY-L070 structure, sample options, pump compatibility, production time and quotation.

Contact Boyu Packaging for BY-L070 samples and pricing.